fastcgi

Bookmarks for 2 apr 2015 through 1 mag 2015

These are my links for 2 apr 2015 through 1 mag 2015:

  • Apache vs Nginx vs OpenLiteSpeed – As a hosting provider, we run hundreds of web servers with varying configurations. Some are tuned to work with large systems, some are tuned to work with lots of domains and some a tuned to be highly resource efficient. The “one size fits all” approach doesn’t work with web technology simply because the tools and the tasks vary so greatly.
  • Ratatype — Online Typing Tutor and Typing Lessons – Learn to type faster with Ratatype typing tutor. Take our typing lessons for free.
  • How do I assign issues to multiple users – JIRA 6.4.x – Atlassian Documentation – JIRA is designed so that issues must be assigned to a single individual to prevent tasks from being overlooked. A team lead or manager should assign issues out to individuals, or your users will pick from a list of issues that they have the option to take on. However, if you want to configure JIRA to allow issues to be assigned to multiple users there are a few option for doing so: Managing Issues via a Queue Managing Issues via Group Ownership Managing Issues via a User Account Managing Issue via Sub-Tasks
  • ONLYOFFICE™ Server Community Version – ONLYOFFICE™ – ONLYOFFICE™ Community Server is a freely downloadable open source software, distributed under the GNU Affero General Public License v.3. It comprises all the basic functional modules sufficient for comprehensive document and project management as well as any size team collaboration.
  • Building a Raspberry-Pi Stratum-1 NTP Server – As an experiment, I purchased one of the low-cost credit-card-size Raspberry Pi computers, and have configured it to run NTP (Network Time Protocol).  I have also used this board with a GPS receiver with pulse per second (PPS) output to make a stratum-1 NTP server, but as I know little of Linux, it has taken some time to achieve this aim!  There are some helpful Linux commands scattered throughout this page.  These notes are almost as much for my own records for the next time I need to visit this project, but I hope they may be helpful to others.[…] [ via MD on http://braindead.tumblr.com/post/115170631701 ]

Bookmarks for 29 ago 2014 through 1 set 2014

These are my links for 29 ago 2014 through 1 set 2014:

  • Scaling PHP apps via PHP-FPM clustering | Jamie Alquiza – PHP-FPM is a way to move your busted PHP handling from one place to another. It's essentially a pool of processes ready for PHP interpretation through FastCGI. While Apache will service client connections and static content, PHP requests are pushed into PHP-FPM. PHP-FPM allows the creation of process pools, each pool having it's own spawning model (e.g. static number of processes, dynamic with min/max, etc.) and other configurations (what UID/GID to run as, listening socket, etc.). A typical setup would be to create a PHP-FPM pool per tenant in a shared hosting environment.
  • KERMIT – KermIT is an opensource IT management solution. KermIT integrates best of breed opensource components with a Web user interface and dashboard to provide a central management solution for IT systems and applications. It provides a consistent, secure framework and a scalable architecture. It manages Linux, Unix and Windows systems. 'Small picture' KermIT relies in the backend on Puppet and MCollective. The license of the developments is the GPL v.3 for the generic part of the source code.
  • Random Start Times For Cron Jobs With Puppet : mycfg.net – Periodic scripts which use a common resource can end up being configured to run at the same time for multiple hosts. The result is that tasks like puppet runs or backups can take longer since they are trying to run all at once instead of being staggered. One way to do this is to give each cron task unique times manually. Another way is to add a random sleep before the task runs. My preferred way is to use the fqdn_rand function in puppet. Here's how it works.

Bookmarks for 26 set 2012 from 17:24 to 17:48

These are my links for 26 set 2012 from 17:24 to 17:48:

  • Optimizing Magento Performance – Tutorials – Magebase – Performance optimization is a good way out in such situation. Optimizing a website, you should consider providing two factors:

    acceptable pages loading speed;
    acceptable pages loading speed when N people use the same application simultaneously.

  • Magento and Nginx Performance Tuning Services – Magento and Nginx Performance Tuning Services
  • Optimize MySQL settings for Magento database – The Tuning Primer is a shell script that allows you to review the MySQL settings and make adjustments to increase Magento database performance and stability. The script will analyze MySQL statistics and provide you with recommendations on how to fine-tune your MySQL server.

    The uptime of your MySQL should be more than 48 hours for correct script work. Only in this case there will be enough information for analysis. Tuning Primer script is compatible with all versions of MySQL starting from 3.23.

Bookmarks for 18 lug 2012 through 19 lug 2012

These are my links for 18 lug 2012 through 19 lug 2012:

  • Generate large amount of test data « my two cents – I’m using the dictionary on linux systems to generate test data. The shell script below generates test data for MySQL, but similar concepts can be used for other database systems as well.
  • JQueryin | Switching Apache from Prefork to Worker MPM in RHEL / CentOS 5.x / Fedora 13 – I’m going to outline the process of switching from Apache’s default installation of MPM Prefork to that of MPM Worker. I will also be covering the proper installation of FastCGI (mod_fcgid) to further improve your server performance. This guide is ideally intended for individuals running on low-memory VPS servers as memory consumption will likely be far lower with the Worker MPM because it spawns threads as opposed to forking child processes. If you’re intentionally reading this article, you’re probably aware of the performance benefits gained.
  • Free PDF Reader – Sumatra PDF – Sumatra PDF is a free PDF, eBook (ePub, Mobi), XPS, DjVu, CHM, Comic Book (CBZ and CBR) reader for Windows.

    Sumatra PDF is small, portable and starts up very fast.

    Simplicity of the user interface has a high priority.

Bookmarks for 19 apr 2011 from 16:57 to 17:01

These are my links for 19 apr 2011 from 16:57 to 17:01:

  • Enabling Pretty Permalinks in WordPress : URL Rewrite Module … – This walkthrough describes how to enable “Pretty Permalinks” for blog posts in the WordPress blog engine that is installed on IIS 7
  • Install and Configure PHP : Install the Microsoft Web … – The fastest and easiest way to install PHP on Internet Information Services (IIS) is by using the Microsoft® Web Platform Installer (Web PI). Web PI completely automates setting up IIS, FastCGI, and the latest version of PHP from the php.net Web site. With Web PI, you can navigate to the “Web Platform” tab and select “PHP” under “Framework and Runtimes” customize link. Alternately, use the instructions that follow as guidance for installing PHP with Windows® Installer or using a compressed (Zip) file installation.
  • Enable FastCGI Support in IIS 7 on Windows Server 2008 … – Internet Information Services 7 (IIS 7) comes with extended support for application frameworks through FastCGI, an open protocol supported by many open-source application frameworks that otherwise may not support stable and high-performance native integration with IIS.FastCGI provides a high-performance alternative to the Common Gateway Interface (CGI), a standard way for external applications to interface with Web servers that has been supported as part of the IIS feature set since the first release.

Bookmarks for 22 feb 2010 through 1 mar 2010

These are my links for 22 feb 2010 through 1 mar 2010:

  • 10 Useful Google Spreadsheet Formulas You Must Know – woorkup.com – Google Spreadsheet is a powerful and free tool to manage complex spreadsheets. This tutorial illustrates ten useful formulas you must know to help you simplify the way you work in Google Spreadsheet.
  • La focaccina aromatizzata : A totanus in the net – Uno dei passaggi obbligati della carriera di “panettiere in casa” è quello di provare a fare il panino aromatizzato. Le ricette in proposito sono migliaia e quindi non vale la pena star qui a spiegare dosi e quantità.

    Mi faceva invece piacere condividere una metodologia.

  • Apache2 / Worker / Fcgid / PHP5 on Debian Linux – Quando il tuo web server non riescie piu’ a gestire le numerose richieste che gli arrivano da tutto il mondo, e’ ora di pensare di cambiare gestione di Apache2 per qualcosa che richieda meno risorse e risulti piu’ performante

    La soluzione di usare Apache in modalita’ “worker” (multi-threaded) invece di quella tradizionale “prefork” e’ il compromesso giusto per ottenere un ottimo web server.

    il problema con il modulo “worker” e’ che quest’ultimo non supporta il modulo nativo per Apache di PHP, per questo bisogna usare php5-cgi e fastcgi (fcgid)[…]